ZN-THS11C-S Next-Generation Production Environment Sensors

OMRON Next-Generation Production Environment SensorsZN-THS11C-S

ZN-THS11C-S Introduce | ZN-THS11C-S Catalog / Manual / Instructions / Software download

OMRON ZN-THS11C-S Product information and technical parameters：
Brand: OMRON
Name: Next-Generation Production Environment Sensors
Model: ZN-THS11C-S
Appearance: Sensor head: 1.5 m type.
Temperature: Measurement range, –25 to 60°C;
Measurement precision, ±0.3°C (at 25°C); Resolution, 0.1°C.
Relative humidity: Measurement range, 0 to 99%;
Measurement precision, ±2.5% (at 25°C, 10 to 85%); Resolution, 0.1%.
Weight (packaged): Approx. 300 g.
Accessories: Mounting screw (M3 x 8) x 1.
Easy temperature and humidity control with an SD Card.

Product name: Branch cable (cable length 1.3 m).
Power supply: Battery/DC cable.
Easy and Quick "Checking Power"at the Worksite. Rated primary current: 5 A.
Rated secondary current: Special output.
Installation: Installed separately.
High-performance Power Monitor Suitable for On-panel Mounting and Display ZN-THS11C-S .
Assists Energy-saving Analysis.
Energy classification for wasted standby and stopped power ZN-THS11C-S
(Classification based on external inputs is also supported.)
Power and current can be measured simultaneously.
Measurement of flow rates with a pulse conversion function.
Simple temperature measurements with Temperature Sensor included in the Unit.
High-precision Measurements.
Measurement of generated power (regenerative power),
leading reactive power, lagging reactive power, and consumed power ZN-THS11C-S .
Power measurements on the primary side of inverters,
which are widely used to save energy.
Automatic range switching for accurate measurement of standby and stopped power.
Energy-saving Functions.
Conversion to monetary cost. (Also used for classified standby and stopped power ZN-THS11C-S . )
Alarm outputs can be selected for active power, reactive power,
regenerative power, current, voltage, or power factor.
The Power Monitor can log measurement data and supports Modbus communications.
Installation and Settings.
Direct measurement of three-phase, four-wire, 400-V line voltage.
Simple measurements without voltage wiring.
Incorrect voltage wiring detection. Simple monitoring of the use of electricity to support energy saving measures.
On behalf of the use of the mechanical equipment, the measuurement of the initial voltage, current,
Cumulative quantity, invalid power, power factor, frequency ZN-THS11C-S .
To achieve a simple record with a memory card. (with memory card function model)
The measurement data can be stored in the main body, and the centralized monitoring and management can be carried out in the communication network ZN-THS11C-S .
Wide 45mm miniaturization, simple set to the DIN guide.

...More relevant models >>>>